DS5244

Programmable Stepper Motor Drive Modbus-RTU RS232 50Vdc 4Arms (5.6Apk)

Related Products

UDP30 UDP30
  • Galvanic isolation
  • Drivers from Windows 98SE to Windows 10 32bit or 64bit
  • Powered via USB port
UDP Commander UDP Commander
  • Running under Windows
  • Simple and intuitive use
  • Single tool for all drives xS10, DS30 and DS5x
  • Free!
DP1651 DP1651
  • Single or three phase input up to 42Vac
  • Output up to 60Vdc
  • Current up to 16Arms
DP1652 DP1652
  • Braking resistor control
  • Single or three phase input up to 42Vac
  • Output up to 60Vdc
  • Current up to 16Arms

Matching motors

M1233070 M1233070
  • Torque 3Nm (425oz-In)
  • Current 4.2Arms
  • NEMA 23 standard flange
M1233062 M1233062
  • Torque 1.8Nm (255oz-In)
  • Current 4.2Arms
  • NEMA 23 standard flange
M1233041 M1233041
  • Torque 1.1Nm (156oz-In)
  • Current 4.2Arms
  • NEMA 23 standard flange
M1233012 M1233012
  • Torque 0.55Nm (77oz-In)
  • Current 2Arms
  • NEMA 23 standard flange
M1173041 M1173041
  • Torque 0.5Nm (71oz-In)
  • Current 1.7Arms
  • NEMA 17 standard flange
DS5244

The DS52 stepper motor drives series is user programmable and equipped with Modbus-RTU fieldbus and communication interface RS232 (for the RS485 interface see the »read more

Technical Data

Power Supply Voltage From 20Vdc up to 50Vdc
Phase Current From 1Arms up to 4Arms in increments of 0.1Arms
Control Mode Fieldbus and/or internal user program (development by free tool UDP Commander)
Field Bus Modbus-RTU RS232, configurable baud rate and format
Performance Up to 3000rpm with 1/128 of step resolution
Function blocks Assignment
Jump and subroutine call, conditional and unconditional
Wait for Event
Math 32bit
Logical operations (OR, AND, XOR, and SHIFT)
Waiting
User Variables Freely declarable with 1byte, 2byte, 3byte and 4byte size.
Special Features Reading and Writing of user variables via fieldbus
High-speed counter also usable for Encoder
Quote captures on the transition of one or more inputs
Timer
Automatic current reduction
Digital Inputs 4 optoisolated: DI0, DI1, DI2, DI3 freely usable
Operating from 3V up to 28V at constant current
Each one NPN, PNP or Line Drive compatible
Digital Outputs 2 optoisolated: FAULT
Operating up to 30V 50mA
Each one NPN or PNP compatible
Analog Inputs 2 converted to 11bit: AI0, AI1
Operating from -10V up to 10V
Also usable as digital inputs
Analog Outputs 1 converted to 10bit: AO0
Operating from 0V up to 10V
Current up to 10mA
Protections, Alarms and Diagnostics Over and under voltage, thermal, Phase Motor interrupted
Short circuit phase to phase, phase to ground, phase-supply
Univocal indication for each anomaly
Connections By functional removable terminal block. Section of cable up to AWG14
Dimensions 100(H) x 22.7(L) x 119(W) mm
3.94(H) x 0.69(L) x 4.69(W) inches
Weight 200g
7.1oz

Benefits

  • Cooperation between fieldbus and internal program possible
  • FREE programming software!
  • Up to 3000rpm at 1/128 steps/rev
  • All motion parameters changeable in realtime, also with motor running
  • 32bit mathematical functions
  • Digital and analog I/O
  • Fast mounting on DIN rail
  • Analog inputs also usable as digital inputs
  • Compact size
  • IP20 protection grade