DS5273
Programmable Stepper Motor Drive Modbus-RTU RS232 90Vdc 3Arms (4.2Apk)
Documents
Software, Driver
Links
Related Products
UDP30

- Galvanic isolation
- Drivers from Windows 98SE to Windows 10 32bit or 64bit
- Powered via USB port
UDP Commander

- Running under Windows
- Simple and intuitive use
- Single tool for all drives xS10, DS30 and DS5x
- Free!
DP1741

- Single or three phase input up to 68Vac
- Output up to 100Vdc
- Current up to 16Arms
DP1742

- Braking resistor control
- Single or three phase input up to 68Vac
- Output up to 100Vdc
- Current up to 16Arms
Matching motors
M1233051

- Torque 1.4Nm (198oz-In)
- Current 3Arms
- NEMA 23 standard flange
M1233032

- Torque 1.1Nm (156oz-In)
- Current 2.5Arms
- NEMA 23 standard flange
M1233022

- Torque 0.8Nm (113oz-In)
- Current 2.5Arms
- NEMA 23 standard flange
M1233012

- Torque 0.55Nm (77oz-In)
- Current 2Arms
- NEMA 23 standard flange
M1173041

- Torque 0.5Nm (71oz-In)
- Current 1.7Arms
- NEMA 17 standard flange
M1173031

- Torque 0.4Nm (56oz-In)
- Current 1.7Arms
- NEMA 17 standard flange
M1173021

- Torque 0.28Nm (39oz-In)
- Current 1.3Arms
- NEMA 17 standard flange

The DS52 stepper motor drives series is user programmable and equipped with Modbus-RTU fieldbus and communication interface RS232 (for the RS485 interface see the … »read more
Technical Data
Power Supply Voltage | From 24Vdc up to 90Vdc |
Phase Current | From 0.8Arms up to 3Arms in increments of 0.1Arms |
Control Mode | Fieldbus and/or internal user program (development by free tool UDP Commander) |
Field Bus | Modbus-RTU RS232, configurable baud rate and format |
Performance | Up to 3000rpm with 1/128 of step resolution |
Function blocks | Assignment Jump and subroutine call, conditional and unconditional Wait for Event Math 32bit Logical operations (OR, AND, XOR, and SHIFT) Waiting |
User Variables | Freely declarable with 1byte, 2byte, 3byte and 4byte size. |
Special Features | Reading and Writing of user variables via fieldbus High-speed counter also usable for Encoder Quote captures on the transition of one or more inputs Timer Automatic current reduction |
Digital Inputs | 4 optoisolated: DI0, DI1, DI2, DI3 freely usable Operating from 3V up to 28V at constant current Each one NPN, PNP or Line Drive compatible |
Digital Outputs | 2 optoisolated: FAULT Operating up to 30V 50mA Each one NPN or PNP compatible |
Analog Inputs | 2 converted to 11bit: AI0, AI1 Operating from -10V up to 10V Also usable as digital inputs |
Analog Outputs | 1 converted to 10bit: AO0 Operating from 0V up to 10V Current up to 10mA |
Protections, Alarms and Diagnostics | Over and under voltage, thermal, Phase Motor interrupted Short circuit phase to phase, phase to ground, phase-supply Univocal indication for each anomaly |
Connections | By functional removable terminal block. Section of cable up to AWG14 |
Dimensions | 100(H) x 22.7(L) x 119(W) mm 3.94(H) x 0.89(L) x 4.69(W) inches |
Weight | 200g 7.1oz |
Benefits
- Cooperation between fieldbus and internal program possible
- FREE programming software!
- Up to 3000rpm at 1/128 steps/rev
- All motion parameters changeable in realtime, also with motor running
- 32bit mathematical functions
- Digital and analog I/O
- Fast mounting on DIN rail
- Analog inputs also usable as digital inputs
- Compact size
- IP20 protection grade